Eight precautions for cleaning hydraulic stations after use

Release time:

2024-05-11

The hydraulic station has been delivered to the customer's factory. Starting from the normal use of the customer after installation and debugging, the hydraulic station is generally used well. However, as the service cycle of the hydraulic station increases, the inside and outside of the station are also dirty!
Eight precautions for cleaning hydraulic stations after use: 1. Do not use kerosene, gasoline, alcohol, steam, or other liquids to prevent corrosion of hydraulic components, pipelines, oil tanks, and seals;
2. During the cleaning process, the hydraulic pump operates simultaneously with the heating of the cleaning medium. When the temperature of the cleaning oil is () ℃, the rubber residue in the system is easily removed;
3. During the cleaning process, non-metallic hammers can be used to strike the oil pipe continuously or discontinuously to facilitate the removal of attachments inside the pipeline;
4. Intermittent operation of hydraulic pumps is beneficial for improving cleaning efficiency, and the interval time is generally () minutes;
5. A filter or filter should be installed on the circuit for cleaning the oil circuit. At the beginning of cleaning, due to the high amount of impurities, an 80 mesh filter can be used, and later on, a filter with a mesh size of 150 or more can be used;
6. The cleaning time is generally () hours, which depends on factors such as the complexity of the system, filtration accuracy requirements, and pollution level;
7. In order to prevent corrosion caused by external moisture, the hydraulic pump should continue to operate until the temperature returns to normal after cleaning;
8. After cleaning the hydraulic station, the cleaning oil in the circuit should be completely drained.

Working temperature of hydraulic system and inspection and replacement of hydraulic oil

Classification of hydraulic stations